C100

Automatic turning machine – for faster machining Ideal for bar stock machining and complex workpieces.

Index C100 turning machine

Insights into the C100

  • 42 mm spindle clearance
  • 110 mm chuck diameter
  • 515 mm turning length
  • Simultaneous machining using 2 or 3 turrets
  • High acceleration (1g) and high rapid traverses (60 m/min)
  • Workpiece carrier with Y-axis available on main and counter spindles
  • 2 powerful motor spindles of identical design
  • Very good vibration damping due to INDEX SingleSlide
  • Maximum parts variety through 3 turrets and 42 tools
  • Already included: the operating system iXpanel - i4.0 ready with 18.5” touch screen and INDEX C200 sl based on Siemens S840D sl
  • Space-saving vertical storage with up to 22 pallets stacked up
  • Pallet size 600 x 400 mm
  • Minimal pallet height 25.4 mm
  • Pallets with blanks are loaded at the top, pallets with finished parts are removed at the bottom – at any time without interrupting production
  • The pallet is pulled in and out by the robot
  • Easy macro-programming
  • 6-axis robot for 6 kg payload with integrated gripper control
  • Double gripper included in the standard
  • 22 pallets (without workpiece-specific inlays) are included in the standard
  • Easy in-house relocation

Key Features

Bar capacity 42mm
Chuck diameter 110mm
Speed max. 7,000rpm
Power at 100% / 40% 25/29kW
Torque at 100% / 40% 49/65Nm
C axis resolution 0.001 degree

CNC turning cycle reduced by up to a third

Poole-based Westwind Air Bearings, turn-mills a component on an INDEX C100 CNC lathe 48 per cent faster than would have been possible on the next quickest turning centre trialled.

Find out more

Leave us a message