Mill/Turn

The latest generation of mill/turn machines from Europe blurs the boundaries between traditional lathes and machining centres. They are not simply lathes with spindles in certain tool positions, but true multi-axis hybrids that can produce complex parts requiring both milling and turning operations in one cycle, offering a ‘one machine only’ production solution, even for complex components from the medical and aerospace sectors, or for entire part families.

With large tool magazines, counter spindles and multiple turrets working in the cut simultaneously, current mill/turn machines can reduce cycle times dramatically, whilst still producing exceptionally high-quality work to finely controlled tolerances and finishes.  All Burkhardt + Weber MCX T type machines are equipped with a torque table to provide effective machining in milling and turning mode.

If you are not sure whether to make the evolution to a mill/turn hybrid then contact our team for help and advice.  Whether it turns out to be a mill/turn machine or an alternative option, we have the expertise to determine the most profitable machine tool solution for you.

  • MCT
    MCT

    The six MCT machining centres are designed specifically for multitasking applications. Milling, drilling, turning – all on one machining centre with high power density thanks to NC-controlled tilting spindle, strong turning tool holder and fast-turning torque table. Integrated horizontal and vertical turning replaces use of multiple additional lathes.

Contact us to discuss Mill/Turn by Burkhardt + Weber
  • C 42
    C 42

    As a milling/turning centre, the C 42 / C 42 U MT responds to demands for highest precision and very small tolerances through its workpiece-dimension-optimized traverse paths and thought-through 5-axis usage.

  • C 52
    C 52

    Ample dimensions, high-performance spindle drives and many useful innovations for practical work turn the C 52 / C 52 U MT machining centre into a top performer.

Contact us to discuss Mill/Turn by Hermle
  • R200
    R200

    5-axis machining on workpiece front and rear allows an extremely large variety of parts. A total of 12 stationary turning tools for particularly high rigidity and cutting performance. High cutting volume by powerful motorized milling spindles at 18,000 rpm. Best damping and guiding properties of the milling spindles result in better workpiece quality and extended tool lives. Outstanding dynamics due to high rapid traverse speeds and accelerations. Already included: the operating system iXpanel i4.0 readywith 18.5” touch screen and INDEXC200-4D based on Siemens S840D sl.

  • R300
    R300

    Change up to 140 tools (HSK-T63) in 6 seconds chip-to-chip time – thereby shortening secondary processing times at both spindles. Two full 5-axis systems in a turn-mill center. Extensive automation options – tailored to the individual customer needs. X travel ranges of up to 780 mm.

  • G200
    G200

    Up to three tool carriers with Y-axis usable on main and counter spindles. Simultaneous machining with up to 4 tools possible. Powerful and dynamic milling spindle (360° B-axis, max. 7,200 rpm, 22 kW and 52 Nm, HSK-A40). Economic complete machining of parts as well as of bar stock and as of chuck parts. Incomparably large degrees of freedom in the large work area for turning-milling operations with up to 660 mm turning length. Excellent ergonomics for quick setup. Compact footprint an enormous power density for economic manufacturing.

  • G220
    G220

    Generous work area designed for turning/milling or milling/turning. 2 powerful, identical motorized spindles (up to 40 kW and 310 Nm). Lower tool turret with Y-axis (100 mm) and 18 or 12 stations. Fast tool change. Simultaneous machining with two tool carriers possible. High dynamics (up to 55 m/min rapid traverse speed). Already included: the operating system iXpanel i4.0 ready with 18.5” touch screen - based on Siemens S840D sl.

Contact us to discuss Mill/Turn by INDEX
  • TNX65/42
    TNX65/42

    For cost effective machining of complex parts. Modular concept with up to 4 tool carriers working simultaneously or independently.

Contact us to discuss Mill/Turn by traub
  • Unispeed 5T
    Unispeed 5T

    Ideal for die & mould production, aerospace and tool construction. 2,000-1,300-1,300mm traverse and orthogonal milling head capable of 64,800 different positions.

  • Unispeed 6T
    Unispeed 6T

    As the Unispeed 5T with a similar array of features and options.

Contact us to discuss Mill/Turn by SHW
  • ValuTurn
    ValuTurn

    Vertical turning and machining centre with portal design which, together with the foundation, the two columns and the cross rail or cross beam forms, a closed frame offering a high degree of stiffness and accuracy.

  • MultiTurn
    MultiTurn

    Machining centre with highly developed change systems for machining units and tools, suitable for medium-sized applications. High efficiency drilling and milling unit with optional rotary table accommodates complex requirements including offset machining.

  • PowerTurn
    PowerTurn

    Powerful vertical machining centre suitable for very large work pieces. Available as a portal or double-column design with a range of upgrade options, including a movable rotary table.

Contact us to discuss Mill/Turn by Waldrich Coburg
Close

VIDEO

Loading